 |
 |
|
|
|
 |
|
|
|
|
||
| Buyers Guide - Guide To..........Series | ||
|
|
||||||||||||||||||
|
"GUIDE
TO …….
"Series
The Guide To … Series of publications have been compiled by the PMMDA to provide plastics processors with a guide to a range of products used in the plastics industry. New products will be continually added so please bookmark this page and visit again soon.To view any any of the listed documents (pdf files) please click on a link. To save to your computer "right click" the link and "save target as" to your chosen location on your computer. You will need Adobe Reader installed on your computer to read these documents. Most modern systems already have this installed, but if not go here for your free copy. CLICK HERE TO VIEW Service Engineers Safe Working Procedures Document Guide To :
A guide to mould temperature control and a code of practice against which mould temperature controller specification can be measured. Mould temperature controllers are used to bring a connected mould (consumer) to an operating temperature, and maintain the set temperature by either heating or cooling.
Provides general information on Robot types and applications. People unfamiliar or with varying degrees of Robot experience will find this guide a useful aid in selecting the correct type of Robot for an application. Benefits, justifications and grippers are also covered.
Provides plastics processors with a guide to material drying and a code of practice against which dryer specifications can be measured.
Provides plastics processors with a guide to recycling/granulating and against which Granulator specifications may be measured.
These guidelines are the agreed basis for the calculation of cooling capacity requirements and are expressed in kilocalories per kilogram per hour of material throughput. |
|||||||||||||||||||
|
|
|||||||||||||||||||
|
Copyright PMMDA 2002 |
